Core Requirements (Candidate Profile)
Mandatory:
- Proven
experience preparing electronic products for IEC 60601-1 or IEC 62368-1
laboratory testing
- Native
Espressif ESP-IDF and NimBLE experience is essential;
Arduino-framework-only backgrounds are not suitable for this engagement
- Expertise
in PCB design/layout optimization for EMC compliance (shielding, galvanic
isolation, 2xMOPP requirements, split ground planes)
- Experience
formatting files for automated SMT assembly lines (centroid data,
fiducials, panelization)
- Must
possess an independent, fully-equipped home hardware testing laboratory
(oscilloscope, logic analyser, and relevant test equipment)
Preferred:
- Prior
involvement in CB Scheme or MDR regulatory submissions (qualifies for
the top of the rate band: 200 PLN/h / ~47 EUR/h)
- Familiarity
with high-voltage / voltage-multiplier circuit design
- Experience
with BLE coexistence and EMI debugging in mixed-signal designs
Item |
Detail |
Role |
Senior Embedded Systems / IoT Hardware Architect |
Contract type |
B2B (Jednoosobowa działalność gospodarcza — sole proprietorship) |
Duration |
4 weeks from commencement, with a planned extension into certification-support and design-transfer phases |
Allocation |
25 hours/week (~5 hours/day; candidate controls their own schedule, provided a daily ~30-minute sync window overlaps with the Client), 100 hours total |
Location |
Remote (Poland-based; candidate must have access to own electronics lab) |
Remuneration |
170–200 PLN/h (~40–47 EUR/h); up to 200 PLN/h (~47 EUR/h) for candidates with prior CB Scheme submission experience — invoiced weekly, paid within 2 working days |
Weekly equivalent |
4,250–5,000 PLN gross/week (~990–1,160 EUR) based on 25 h/week |
Total contract value |
17,000–20,000 PLN (~3,950–4,650 EUR) for the 4-week / 100-hour engagement |
Follow-on |
Planned DFM support retainer (~10 h/month at the same rate) plus two further hardware projects in the pipeline for a proven performer |
,[1. Written verification audit report with prioritized remediation plan (Phase 1), 2. Updated PCB design files (source + Gerbers) with corrected HV multiplier topology, production power supply, and EMC/isolation improvements, 3. Updated firmware repository with BLE stability fixes, documented build environment, 4. SMT-ready manufacturing package (centroid files, panelization, fiducial documentation), 5. Certification readiness documentation package for IEC 60601-1 / CB Scheme submission, 6. Final handover: walkthrough session and recorded summary of outstanding risks, Priority rule: If, by the end of Week 3, Tier 1 work (Phase 2) has consumed more than 85% of total contracted hours, Tier 2 deliverables move to an agreed extension week at the same hourly rate — decided jointly by the Parties and confirmed in writing, not deferred silently., Respin carve-out: Any remediation identified in Phase 1 that can only be physically validated on a newly fabricated PCB (respin) shall be delivered as design + validated simulation within this engagement; physical prototype validation shall be scoped separately and is explicitly excluded from the 4-week duration.] Requirements: nimble, • Native Espressif ESP-IDF, Arduino-framework, PCB design, layout optimization for EMC compliance, automated SMT assembly lines, electronic products for IEC 60601-1 or I, CB Scheme, MDR regulatory submissions, BLE coexistence, EMI debugging